|
 |
|
Exterior Building with Gable Roof
|
|
|
|
|
|
|
|
PANELS:
The panels are nominal 3-inch thick with standard sizes from four feet wide by eight feet tall to four feet wide by ten feet tall. Custom heights over ten feet are also available. Panel construction varies over a wide range. Standard Metal wall panels will have either Embossed 24 ga. prepainted steel or .019 prepainted aluminum skins laminated to 1/8" tempered hardboard both sides of honeycomb or expanded polystyrene foam core. Many more custom panel configurations are available.
POSTS:
Posts are to be of four-piece design to form a non-progressive wall system. Cavity of posts will allow use of approved steel electrical boxes that are now required by building codes. Posts shall also act as raceways for phone lines, data lines, and other electrical lines.
The structural elements of the posts shall be connected by machine bolts and nuts no more than 18" center line. All extrusions shall be 6063-T5 aluminum, minimum .062 thickness, with a clear anodized finish.
CORNER POSTS:
Corner posts will be 3" x 3" Steel Tube welded to Structural Steel Channel base frame.
BASE CHANNEL:
Base channel provides support for wall panels and posts while allowing space for anchors or post uplift connectors. Its low profile design is aesthetically pleasing and eliminates the need for additional base molding. Material shall be 6063-T5 aluminum, minimum .062 thick, and clear anodized finish.
CAPPING CHANNEL:
Capping channel acts as a support for vertical deck loads in addition to serving as a continuous diaphragm member. Material is 6063-T5 aluminum, minimum .062 thickness, and clear anodized finish.
DOORS:
Doors will be 1 3/4" thick and standard 42" wide by 80" tall to accommodate equipment or furniture. Door material will match wall panels and be framed in an aluminum channel for heavy traffic areas. Door jamb is a heavy duty extrusion. All doors are factory prehung with hinges and door lockset. Windows are 2 x 2 with 1/4" tempered safety glass. Extrusions are 6063-T5 aluminum, minimum .062 thickness, with clear anodized finish.
WINDOWS:
Standard fixed windows are 44" wide by 40" tall with 3/16" tempered safety glass installed in aluminum frame. Window units are completely modular. Horizontal sliding and pass thru windows can also be provided. Frames are 6063-T5 aluminum, .062 minimum thickness, with clear anodized finish.
ROOF SYSTEM:
Standard Panelized Gable Roof with 3 in 12 pitch, panels are steel faced with foam core. Optional: Rubber Roofiing and Standing Metal Roof systems.
CEILING SYSTEM:
Optional heavy duty white enameled steel T-BAR hung from roof by 12 ga. galvanized ceiling wire and self tapping sheet metal screws. Ceiling tiles are 2 x 4, 5/8" thick, Mineralboard. Additional R-19 insulation is optional.
FLOOR:
Standard 1 1/2”, 22 GA. galvanized decking, 1 1/8” T & G Plywood with 12” x 12” x 1/8” vinyl tile. Optional Steel or Aluminum Diamond Plate or carpet
Tags:
panels,
Embossed,
prepainted,
steel,
aluminum,
skins,
laminated,
tempered,
hardboard,
honeycomb,
polystyrene,
foam,
core,
Posts,
four-piece,
non-progressive,
wall,
system,
steel,
electrical,
boxes,
building,
codes,
Channel,
Base,
channel,
Capping,
channel,
clear,
anodized,
finish,
Doors,
hinges,
lockset,
Windows,
safety,
glass,
Panelized,
Gable,
Roof,
Rubber,
Roofiing,
heavy duty,
enameled,
galvanized,
ceiling,
Diamond,
Plate ,
|
|
|
|
|
|
|
|
Product Request
- Complete the form below; Propliers will send it to companies, which can supply your product requested.
|
|
|
|
|
|
|
|
|
|
|
|
|
Please provide a detailed Product Description (Color, Size, etc...)
|
|
|
|
|
We suggest to ask supplier(s) for: Minimum Order Quantity Required, Delivery Time, Packaging Detail, etc...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Abtech, Inc.
|
|
Company Profile Abtech, Inc. has been manufacturing Quality Modular Cleanrooms, Buildings, Mezzanines, and other Pre-Assembled Modular Cleanroom Systems since 1992. Each of our products, large or small, are built to be efficient, durable and versatile, while providing the most economical packages to best meet your business needs.
Our goal is to provide our customers with the highest quality products, precision cleanroom installation and outstanding technical cus
|
|
|
|
|
|
|
|
|
|
Stationary Auto Detailing Pressure Washers Clean with Steam
|
|
|
Published at Propliers: 11/16/2009
Release Date: 11-13-2009
|
|
|
|
Daimer Industries®, a top global supplier of commercial-strength cleaning systems, improved its Super Max™ line of auto detailing systems by introducing the 15500SP power washer. The systems feature Super-HOT™ or Super High-Temperature Optimized Technology™ capabilities, which provides dedicated wet more ...
|
|
|
|
|
|
|
|
|
Bare Copper Wire Contractor Packs
|
|
|
Published at Propliers: 10/25/2009
Release Date: 2-12-2009
|
|
|
|
Now introducing 25 pound contractor packs for Royal® / Triangle® brand Bare Copper Wire.
“This convenient package allows portability and easy payoff from virtually any dispensing system,” said Eric Corzine, product manager at Coleman Cable. “The durable, space saving design allows the co more ...
|
|
|
|
|
|
|
|
|
|
|
|
|